The Amboyna (Pterocarpus indicus) probably gets its name from its prevalence on the island of Ambon in Indonesia. It is a species of padauk tree, which are not exactly rare and even extend as far as Africa. However, the 3-dimensionality and distinctive beauty of the Amboyna is second to none. Moreover, since it has a quite faultless burl, amboine is a highly coveted veneer wood and is used, for example, on Rolls Royce fittings.
This knife scales has been stabilized with Plexiglas® (PMMA) and fully penetrated. It will no longer absorb water, is dimensionally stable, and will no longer crack. It can be easily worked, but it does not react well to excessive heat during processing, so take care when sawing, drilling and grinding. (When it gets very hot, the PMMA begins to smear.) Very easily worked with sharp tools, but the odor stays within limits and is negligible. The stabilizing gives this block excellent hardness, durability, and stability. It is therefore suitable for heavy duty applications or in areas that get wet, such as outdoors.
Dimensions: approx. 125 x 40 x 10 mm
You will get the shown pair of scales!
The pair of scales are dry and can be processed immediately.
The scales is sanded and coated with a layer of shellac.
This allows you to see exactly the color you will obtain.
Finely grained wood may contain imperfections such as open knots, bark inclusions, or cracks that are typical of the species. These flaws come from the way the tree has grown and are completely natural. They can usually be filled with low-viscosity cyanoacrylate (super glue) and wood dust.